When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm very proud of myself. No, this is not the hardest thing in the world, but I have now used my race ramps twice, instead of paying somebody else labor, so in my opinion they have now paid for themselves.
One of my DRL/parking lights went out, so I ordered RadioFlyers switchback harness 2.0 along with the bulbs. They work as advertised.
They are orange at startup, or when you are turning other lights on and off, and you have your orange turn signal, but you have white DRLs, somewhat like a more modern car. Mine will not be as bright white as others, because my housing are blacked out by Corvette Enhancements.
In the video below, the delay of them turning on after the car starts is because when on the ramps I have the E-brake on. Funny story....I wanted to make sure they were working so I had my Dad look at the front of the car while I started it on the ramps. I freaked out for a second because nothing came on....duh....e-brake was on. LOL
Looks great! I have the RF switchback harness, lenses, and LEDs in a box waiting for me to get some ambition. Any issues with the wiring that wasn't plug and play?
Looks great! I have the RF switchback harness, lenses, and LEDs in a box waiting for me to get some ambition. Any issues with the wiring that wasn't plug and play?
No, it was all plug and play. The bulbs will work without the harness installed, you'll just have orange DRLs if no other lights are on. The purpose of the harness is to give you the white DRLs.
One thing to keep in mind-almost forgot it happened-thought I was done, turned them on-1 was white, 1 was orange. Turned the bulb around, and then it worked just fine, so I guess there is a "right way" for the bulb to go in.
Originally Posted by lebeeby
Thank you for the video. I was curious about the visibility through the smoked acrylic covers, but looks very good.
Thanks. Really depends on who tinted them and how dark the tint is. Mine turned out fine. Even better in person I think.
Quick question - I see that you did not have hyperflash with the hazards on. Did you install resisters at the bulbs? I put their hyperflash harness in and as is typical for C5's the turns worked great but hazards are hyperizing!
Quick question - I see that you did not have hyperflash with the hazards on. Did you install resisters at the bulbs? I put their hyperflash harness in and as is typical for C5's the turns worked great but hazards are hyperizing!
Tom
Yes, I have the hyperflash harness installed. I have LEDs front and rear.
The halo LED taillights will not hyperflash on hazards due to large resistors to mimic halogens being part of their design, all other LED taillights will hyperflash without resistors added in.
12-08-2018, 10:54 PM
Installed RadioFlyer Switchback Harness 2.0 Today
