Dumb Question?
Thread Starter
Burning Brakes
Joined: Feb 2022
Posts: 818
Likes: 235
From: Bakersfield, CA
Dumb Question?
So looking ahead as I progress to my pseudo rebuild/repairs/mod, I want to go LED or HID for everything possible. Undecided as to which way to go but reading all about the hyper-flash connection I only have a couple of questions. Is it needed for both the HID and LED? Is only one hyper-flash connection needed and where is the best place for it to be installed. I guess that was 3 questions. TIA and cheers!!!
Burning Brakes
Joined: Dec 2022
Posts: 1,022
Likes: 884
From: Nappytown MD
only one hyper flash module for the LED's you add, and it mounts under the dash to the right of the steering column. A bunch of video's on Youtube on how to install. Super easy and all you need is a phillips screwdriver to remove the panel under the steering wheel to get access to where you plug in the hyper flash module. HID's will come with a ballast you'll add up around the headlight bay. Most HID's that are made specific for a certain car will come with ballast install location recommendations.
I installed a hyper flash module as I have LED DRL's, rear blinkers and marker lights and the blinkers all flash at the correct rate-
I installed a hyper flash module as I have LED DRL's, rear blinkers and marker lights and the blinkers all flash at the correct rate-
Thread Starter
Burning Brakes
Joined: Feb 2022
Posts: 818
Likes: 235
From: Bakersfield, CA
Well I found this on Amazon for $7. Seems you can adjust the frequency to match the OEM flashing.
Instructor
Joined: Nov 2015
Posts: 246
Likes: 105
From: Detroit area, Michigan
Hyperflash Harness - Amazon:
Hyperflash Harness - Vette-lights:
https://www.vette-lights.com/collect...-flash-harness
Hyperflash Harness Install:
Hyperflash Harness - Vette-lights:
https://www.vette-lights.com/collect...-flash-harness
Hyperflash Harness Install:
