FS: AEM fuel pump, ECS fuel ring and harness
#1
Melting Slicks
Thread Starter
AEM fuel pump, ECS fuel ring and harness
close
Last edited by Turpid porpoise; 10-04-2018 at 09:40 AM.
#2
Instructor
Pm sent
I've stepped up to an RSI dual hanger so I don't need any of this stuff anymore. The AEM pump, ECS harness, hobbs switch and ECS fuel ring have only a few miles on them as I never really drove it before changing my setup yet again. I tested everything before removal and it all worked flawlessly.
AEM Pump, ECS fuel ring, harness and hobbs switch. Ill also include a 3/8" to 8AN adapter and a 8AN tee(female, male, male) that I used to tie into the OEM feed line on the firewall -$300.00 + shipping and fees
Fuel ring will be removed once my RSI hanger arrives.
AEM Pump, ECS fuel ring, harness and hobbs switch. Ill also include a 3/8" to 8AN adapter and a 8AN tee(female, male, male) that I used to tie into the OEM feed line on the firewall -$300.00 + shipping and fees
Fuel ring will be removed once my RSI hanger arrives.
#3
Melting Slicks
Thread Starter
bump
#5
Melting Slicks
Thread Starter
It is 3.5"
Last edited by Turpid porpoise; 10-13-2017 at 06:20 AM.
#6
Melting Slicks
Thread Starter
Bump
#8
Melting Slicks
Thread Starter
Thanks Ed.
Pending sale.
Pending sale.
#9
Melting Slicks
Thread Starter
Back up for sale
Last edited by Turpid porpoise; 10-12-2017 at 06:34 PM.
#10
Melting Slicks
Member Since: Jan 2009
Location: Easley/Anderson South Carolina
Posts: 2,127
Likes: 0
Received 32 Likes
on
24 Posts
What's the lph of the AEM pump? And on the ring, the pump pulls from the fitting on the outside, but is there anything to go from the ring to the floor of the tank? (I'm assuming not from what all I can look up online, I'm curious how it pulls full of the fuel is sloshing about)
#11
Melting Slicks
Thread Starter
What's the lph of the AEM pump? And on the ring, the pump pulls from the fitting on the outside, but is there anything to go from the ring to the floor of the tank? (I'm assuming not from what all I can look up online, I'm curious how it pulls full of the fuel is sloshing about)
#12
Melting Slicks
Thread Starter
Still here, this just needs a hose from the pump to the tee and it's a complete kit for $450 less than ECS sells it.
#13
Melting Slicks
Thread Starter
Pending sale again