Damaged speaker
Thread Starter
Advanced
Joined: Jan 2005
Posts: 64
Likes: 0
From: Harker Heights Texaa
Damaged speaker
Damaged driver speaker cover with my combat boots. Can I push the dent out without removing the door panel? If, not a link to "how to"Thanks ahead for your help,read this forum everyday, great people. Wild Bill
(Retiring next month, 39 years of military flying and now plan to just fly (cruise) in my vette.
Race Director
Joined: Feb 2004
Posts: 11,651
Likes: 9
From: HOW FAST WAS I GOING OFFICER? Los Angeles Hating GM Dealership Service Dept.'s Since Sept. 2004
St. Jude Donor '04-'05-'06-'07
Congrats sir It's not difficult.
Here's a link to door panel removal ... don't say I never gave you anything
http://www.vetteessentials.com/instr...or_handle.html
Dave Q.
Here's the pic ... there are just several tabs you have to starighten. They're pretty stiff though. Take you time.
It's not difficult.Here's a link to door panel removal ... don't say I never gave you anything
http://www.vetteessentials.com/instr...or_handle.html
Dave Q.
Here's the pic ... there are just several tabs you have to starighten. They're pretty stiff though. Take you time.
Last edited by MyVetteDream; Mar 10, 2005 at 10:06 PM.
Racer
Joined: Feb 2004
Posts: 316
Likes: 140
From: Metro Atlanta GA
There is no way to remove the grill without removing the door panel (well, not without mangling it). You might be able to reach in behind the grill without pulling the door panel off completely, just pulling the bottom out far enough that you can wedge your hand behind the grill.
Here are great directions to taking off the door panel. If it is your first time, you will break at least one of the pins, so you are better off buying some ahead of time at a Chevy dealership, or at Auto Zone, Pep Boys, etc.
You can find some cheap door panel removal tools here. These will help keep you from breaking pins or grommets.
Here are great directions to taking off the door panel. If it is your first time, you will break at least one of the pins, so you are better off buying some ahead of time at a Chevy dealership, or at Auto Zone, Pep Boys, etc.
You can find some cheap door panel removal tools here. These will help keep you from breaking pins or grommets.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
Originally Posted by WildBill_64
Thanks, great info. What length are the pins as I will plan ahead now...
Thanks, WildBill
Thanks, WildBill
Robert
Pro
Joined: Sep 2000
Posts: 703
Likes: 0
From: Cowtown
There is also another method that I discovered and tried myself with success. Locate some fine gauge music wire. Bend a small loop at the end and feed through the grill. With some finagling, you should be able to wrap the wire around the mesh and pull the wire through. With both ends of the wire sticking out along with a pair of vice grips, clamp down on the wires and pull the dent out. You may need to do this several times.
Good luck.
Good luck.
