Recommend Tuner/Installer....
Thread Starter
Pro
Joined: Dec 2004
Posts: 508
Likes: 0
From: boston ma
Recommend Tuner/Installer....
I am in the process of purchasing the following;
1. LG Long Tube Headers
2. 4.10 Gears
3. LS1 Edit Tune-Up/Dyno
Can you help me locate someone in the Boston area or somewhere within a state or two that has the equipment and experience to do these mods for me? A few months back I was in contact with a company from Raynham,MA. but I have since lost his info. I would love to travel to see the boys at East Coast Superchargers but New Jersey may be a bit too far.
Thanks for your imput!
1. LG Long Tube Headers
2. 4.10 Gears
3. LS1 Edit Tune-Up/Dyno
Can you help me locate someone in the Boston area or somewhere within a state or two that has the equipment and experience to do these mods for me? A few months back I was in contact with a company from Raynham,MA. but I have since lost his info. I would love to travel to see the boys at East Coast Superchargers but New Jersey may be a bit too far.
Thanks for your imput!
Racer
Joined: Jul 2004
Posts: 282
Likes: 2
From: Wappingers Falls NY
Call the 'Doctors ' !!
Call The Vette Dpctors. they are in Long Island ,NY.. they are also forum participants ..look for them on the left side of the page. I drive 200 miles to have them work on my vette and i work for a used corvette dealer ! the guys there know their stuff , you can visit their website and see what they can do at a very good price !!!
[IMG]
[/IMG]
[IMG][/IMG]
Melting Slicks
Joined: Dec 2004
Posts: 2,322
Likes: 2
From: New York NY
Cruise-In VI Veteran
St. Jude Donor '05
Reputable shops near you include Dez Racing (Seekonk, MA) and Tbyrne Motorsports.
If you want to find a forum member that will help out and save on labor costs contact forum member "connecticut" located in you guessed it, CT. He does good work and has done a lot for local guys.
If you want to find a forum member that will help out and save on labor costs contact forum member "connecticut" located in you guessed it, CT. He does good work and has done a lot for local guys.
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Contact Don (AKA Slowhawk) at DEZ racing in Seekonk, MA right across the street from the speedway. Tell him Bob T sent you. He did my car twice (headers last year, cam this year) and EG's car and several others here on the forum. Takes about four hours. He will start with a ride in the car recording data, then put in an initial tune and check it out then onto the dyno. He is also conservative with his tunes. Someone I know just pulled heads off a car that another tuner did for him and the valves were white, too lean. Let me know if you need any more information.
