Ideas for Shift Knob
Thread Starter
Pro
Joined: Jul 2005
Posts: 514
Likes: 110
From: Sacramento, California
Ideas for Shift ****
I have the hurst short throw shifter for my MN6 C5 and the aftermarket shift **** that the original owner of the car gave me vibrates like crazy when accelerating. I was told if I buy a Hurst shift **** the rattling will go away in the shifter.
So if anyone has pics of thier shift **** setups I would really like to see them. If anyone has some helpful ideas let me know. I did a search came up with nothing. I found some shift ***** on a couple of vendors website, but I dont see any Hurst shift ***** except the classic which looks pretty plain.
So if anyone has pics of thier shift **** setups I would really like to see them. If anyone has some helpful ideas let me know. I did a search came up with nothing. I found some shift ***** on a couple of vendors website, but I dont see any Hurst shift ***** except the classic which looks pretty plain.
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
Although I have not tried one myself, I hear that a weighted shift **** alleviates vibration. I intend to make a weighted version of my translucent ***** by Summer time, as they seem to be a sought-after item. Here's my design:
Thread Starter
Pro
Joined: Jul 2005
Posts: 514
Likes: 110
From: Sacramento, California
Originally Posted by Dave68
Although I have not tried one myself, I hear that a weighted shift **** alleviates vibration. I intend to make a weighted version of my translucent ***** by Summer time, as they seem to be a sought-after item. Here's my design:
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
Originally Posted by pski694
put a piece of rubber between the shifter stick and the shifter itself and then bolt them together using blue loctite, very tight. This will remove the rattle.
i have the billet hurst ****.
Melting Slicks
Joined: Jul 2004
Posts: 2,846
Likes: 5
From: Sandy Ego CA
I have had a 21/4" Hurst **** on my Hurst shifter since it's been new and I have never had noise issue, I also took a 4 " X 6 " peice of Dyna Matte sound deadner over the shifter, you can get a small sheet of this stuff from any Stereo shop. My shifter is quiet
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
Originally Posted by RoHo
I have had a 21/4" Hurst **** on my Hurst shifter since it's been new and I have never had noise issue, I also took a 4 " X 6 " peice of Dyna Matte sound deadner over the shifter, you can get a small sheet of this stuff from any Stereo shop. My shifter is quiet
Thread Starter
Pro
Joined: Jul 2005
Posts: 514
Likes: 110
From: Sacramento, California
Originally Posted by Rock'en Silver 02
unless u have the billet it's one piece and doesn't rattle.
i have the billet hurst ****.
i have the billet hurst ****.
Thank you
Ryan
Safety Car
Joined: Mar 2004
Posts: 4,048
Likes: 1,479
From: South Florida
I had the same issue when I instaleld my hurst short throw, was noisy and had a bad vibration with the Momo shift ****.
Well i read a noise fix on the forums here somewhere. You basically take a 1 1/2 inch fernco rubber pipe cap and cut a hole in the middle and slide down over the hurst shaft and it fits perfectly into the opening after follow the hursts directions to install the rubber surround piece.
After doing this mod the noise was lessesned but it still vibrated and was still noisy. I decided to try a different shift **** so I ordred the Black Z06 billard style shift know from Ecklers.com.
I installed it and WOW, the vibration and noise is completely gone! The **** looks sick and feels very comfortable.
If anyone using the hurst short throw is experiencing Vibrations and Noise using it I recomend doing the Fernco mod and adding a Billiard style shift ****. The Eckler ones are more expensive then the old style Hurst *****, but they look awesome and come in a Z06 or Corvette logo
http://www.ecklers.com/dept.asp?dept%5Fid=1602&level=2
theres my shift ****
Well i read a noise fix on the forums here somewhere. You basically take a 1 1/2 inch fernco rubber pipe cap and cut a hole in the middle and slide down over the hurst shaft and it fits perfectly into the opening after follow the hursts directions to install the rubber surround piece.
After doing this mod the noise was lessesned but it still vibrated and was still noisy. I decided to try a different shift **** so I ordred the Black Z06 billard style shift know from Ecklers.com.
I installed it and WOW, the vibration and noise is completely gone! The **** looks sick and feels very comfortable.
If anyone using the hurst short throw is experiencing Vibrations and Noise using it I recomend doing the Fernco mod and adding a Billiard style shift ****. The Eckler ones are more expensive then the old style Hurst *****, but they look awesome and come in a Z06 or Corvette logo
http://www.ecklers.com/dept.asp?dept%5Fid=1602&level=2
theres my shift ****
Last edited by Internets_Ninja; Dec 21, 2005 at 02:06 AM.
Thread Starter
Pro
Joined: Jul 2005
Posts: 514
Likes: 110
From: Sacramento, California
Originally Posted by TriPinTaZ
I had the same issue when I instaleld my hurst short throw, was noisy and had a bad vibration with the Momo shift ****.
Well i read a noise fix on the forums here somewhere. You basically take a 1 1/2 inch fernco rubber pipe cap and cut a hole in the middle and slide down over the hurst shaft and it fits perfectly into the opening after follow the hursts directions to install the rubber surround piece.
After doing this mod the noise was lessesned but it still vibrated and was still noisy. I decided to try a different shift **** so I ordred the Black Z06 billard style shift know from Ecklers.com.
I installed it and WOW, the vibration and noise is completely gone! The **** looks sick and feels very comfortable.
If anyone using the hurst short throw is experiencing Vibrations and Noise using it I recomend doing the Fernco mod and adding a Billiard style shift ****. The Eckler ones are more expensive then the old style Hurst *****, but they look awesome and come in a Z06 or Corvette logo
http://www.ecklers.com/dept.asp?dept%5Fid=1602&level=2
theres my shift ****
Well i read a noise fix on the forums here somewhere. You basically take a 1 1/2 inch fernco rubber pipe cap and cut a hole in the middle and slide down over the hurst shaft and it fits perfectly into the opening after follow the hursts directions to install the rubber surround piece.
After doing this mod the noise was lessesned but it still vibrated and was still noisy. I decided to try a different shift **** so I ordred the Black Z06 billard style shift know from Ecklers.com.
I installed it and WOW, the vibration and noise is completely gone! The **** looks sick and feels very comfortable.
If anyone using the hurst short throw is experiencing Vibrations and Noise using it I recomend doing the Fernco mod and adding a Billiard style shift ****. The Eckler ones are more expensive then the old style Hurst *****, but they look awesome and come in a Z06 or Corvette logo
http://www.ecklers.com/dept.asp?dept%5Fid=1602&level=2
theres my shift ****
Thanks! This was exactly the kind of thing I was looking for. I like that billard style shift **** with the C5 logo. It looks good and simple.
Safety Car
Joined: Mar 2004
Posts: 4,048
Likes: 1,479
From: South Florida
Originally Posted by Sicvette
Thanks! This was exactly the kind of thing I was looking for. I like that billard style shift **** with the C5 logo. It looks good and simple.
Instructor
Joined: Feb 2004
Posts: 124
Likes: 0
From: Nashville TN
I use an 'Old School' **** from a WWW.FATKNOBS.com on my HURST and have no noise or vibration at all. These are custom made and come in black or white. They are also bored deep into the **** so they screw all the way doen making the HURST short shifter even shorter!
Like the name says; they are FAT. I love mine. Best I have tried and I have tried them all... Good Luck
Like the name says; they are FAT. I love mine. Best I have tried and I have tried them all... Good Luck
Instructor
Joined: Aug 2005
Posts: 212
Likes: 0
From: Atlanta GA
I have a Hurst shifter with a Momo ****. The **** came with a rubber cap (actually, an assortment of them in different sizes) that fit over the end of the shifter. The **** fits VERY tightly over that cap, and I have no weird vibrations or noises. The **** was a little pricy, but I have been very pleased with the product. 
Drifting
Joined: Jan 2004
Posts: 1,419
Likes: 6
From: Alamosa CO
I made my own **** for the Hurst using a #2 billiard ball. (the blue matches my VE Electron BLue interior accents) Very easy to do, just drilled it using a 33/64" drill in a drill press and tapped it with 9/16 x 18
tap. Have never had any noise issues, but was very carful when adjusting the stops that are part of the Hurst shifter. You do not want the stop bolts to touch the shifter stalk during normal shifting, Just pay attnetion to that when doing the install and you won't have any noise/vibration issues. HTH
Jim
tap. Have never had any noise issues, but was very carful when adjusting the stops that are part of the Hurst shifter. You do not want the stop bolts to touch the shifter stalk during normal shifting, Just pay attnetion to that when doing the install and you won't have any noise/vibration issues. HTH
Jim
