Lifters??
Thread Starter
Safety Car
Joined: Jun 2003
Posts: 4,510
Likes: 240
From: Coconut Creek FL
Lifters??
I am planning on gathering all the parts to have Heads and Cam package on my 97 done sometime...I am going with New LS6 heads (04) and am thinking since I am in there, I should change the lifters...are the LS6\LS1 lifters the same? meaning will LS6 lifters fit in my early LS1 engine and are they the best to go with? I am not looking for a super drag cam package (if that makes the choice any different)it still has to be a daily driver...
Thanks!
Thanks!
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Well, the later lifters were supposed to be an improvement over the original lifters due to the way the lower body and roller support was designed. However, having said that, someone on LS1Tech recently opened their motor on an 02 and found the early design lifter installed. Several others have found the same.
I am doing the same things as you are, and elected to go with the Morel lifter instead. It is probably the best quality lifter out there.
I am doing the same things as you are, and elected to go with the Morel lifter instead. It is probably the best quality lifter out there.
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Originally Posted by byte_me
how about LS6 or even LS2 lifters? any good?
Lifter discussion
