major electrical problems
Safety Car
Joined: May 2003
Posts: 4,961
Likes: 2
From: Vette-hid.com Lost in DFW texas
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06-'07
Originally Posted by cloneman315
thanks u dont need this splice pack connector?do u know what this is i am talking about thAt they are telling me i need?
Get you dealer buddy to come by with a laptop and a tech 2.
I own my own tech 2 with GM sis programming.
Tool retails for about 5k and then the software licenses.
About 7k invested in tool without laptop to run it.
Thread Starter
Advanced
Joined: Mar 2005
Posts: 88
Likes: 0
so the splice pack is for bench checking only then?so what do they need to do this im sure the dealer he works for has a tech 2 as a matter of fact i know they did because the tech 2 wouldnt link to the car with the old pcm bcm i thought he said the techs said that at the star connectors in the passenger side that you unplug the shorting bar and this module break out box plugs in there
Safety Car
Joined: May 2003
Posts: 4,961
Likes: 2
From: Vette-hid.com Lost in DFW texas
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06-'07
Originally Posted by cloneman315
so the splice pack is for bench checking only then?so what do they need to do this im sure the dealer he works for has a tech 2 as a matter of fact i know they did because the tech 2 wouldnt link to the car with the old pcm bcm i thought he said the techs said that at the star connectors in the passenger side that you unplug the shorting bar and this module break out box plugs in there
This is the the program he will use with his tech 2 to reprogram your pcm and bcm.
If he works for a gm dealer he will be familiar with using it.
http://www.otctools.com/manuals/2-24...SPSEng2004.pdf
Safety Car
Joined: May 2003
Posts: 4,961
Likes: 2
From: Vette-hid.com Lost in DFW texas
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06-'07
Originally Posted by cloneman315
well dealer found this programmer so we are going to try it tommorow morning ill keep u guys posted
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Advanced
Joined: Mar 2005
Posts: 88
Likes: 0
this thing is killing me well today saturday we ripped this car apart cleaned wires checked everything was on phone with bill for a hour thanks bill,and we got just about ever bcm controlled thing working so monday we are going to try to flash the pcm bcm and we shall see
Safety Car
Joined: May 2003
Posts: 4,961
Likes: 2
From: Vette-hid.com Lost in DFW texas
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06-'07
Originally Posted by cloneman315
this thing is killing me well today saturday we ripped this car apart cleaned wires checked everything was on phone with bill for a hour thanks bill,and we got just about ever bcm controlled thing working so monday we are going to try to flash the pcm bcm and we shall see
Thread Starter
Advanced
Joined: Mar 2005
Posts: 88
Likes: 0
update it is running,what a pian in the *** but we put the new pcm in and flashed the bcm and the new pcm and also the door modules and it runs perfect so far ,no light on the dash at all THANKS BILL FOR THE TECH SUPPORT
Safety Car
Joined: May 2003
Posts: 4,961
Likes: 2
From: Vette-hid.com Lost in DFW texas
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06-'07
Originally Posted by cloneman315
update it is running,what a pian in the *** but we put the new pcm in and flashed the bcm and the new pcm and also the door modules and it runs perfect so far ,no light on the dash at all THANKS BILL FOR THE TECH SUPPORT