SDPC 402 Good/Bad??
Thread Starter
Team Owner
Joined: Jan 2006
Posts: 20,800
Likes: 59
From: Tellico Village, Tn
St. Jude Donor '08
SDPC 402 Good/Bad??
Anyone out there running a SDPC 402 w/blower. If so what are your experiences with this engine. My research seems pretty positive, but would like to know first hand experiences.
Former Vendor
Joined: Mar 2006
Posts: 153
Likes: 0
It's all good. 
Actually, I have been trying to work on a deal to do some testing with different blowers on the engine dyno. All of our recent dyno's have been with a slightly higher CR (~11.5:1) for NA applications.
You can find some dyno results on a stock LS2 crate engine with a Maggie on it here that we did last year.
PM sent as well.
Actually, I have been trying to work on a deal to do some testing with different blowers on the engine dyno. All of our recent dyno's have been with a slightly higher CR (~11.5:1) for NA applications.
You can find some dyno results on a stock LS2 crate engine with a Maggie on it here that we did last year.
PM sent as well.
Racer
Joined: Jan 2003
Posts: 493
Likes: 1
From: Goose Creek SC
Sdpc402
No blower on my SDPC, but John worked with me on getting my motor built and Holy Crap is that thing strong!
Haven't had the dyno tune done yet but even with a base tune it has tons of torque from way down low!
Haven't had the dyno tune done yet but even with a base tune it has tons of torque from way down low!
Drifting
Joined: Dec 2002
Posts: 1,472
Likes: 1
From: Reynoldsburg oh
No blower on my sdpc 402 ls2 but I can tell you they send you everything to convert the ls1-6 to an ls2. All wire harnesses and everything. It was an easy shortblock to install. 
Talk to Marty there, he is very helpful.
Talk to Marty there, he is very helpful.
