Service Active Handling :banghead:
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 27,897
Likes: 9
From: I have no tolerence for liberals and fools, but sometimes i repeat myself
CI 3-5-7-8-9 Veteran
St. Jude Donor '08
Service Active Handling :banghead:
So I'm cruising on the Interstate last night when I go into a tunnel. Well being the gearhead that I am, drop it into third and stand in it. Whne I shifted to 4th the service AH message showed up on the DIC as well as the AH off light on the speedo. After shutting the car off and turning it back on, all is normal. Happened again on the way home (same tunnel different direction, lol). Is there a way to pull a code for this through the DIC or is there a likely culprit. When it does it you can feel the car twitch ever so slightly (passenger couldn't feel it, I could).
Tech Contributor
Joined: Dec 2003
Posts: 19,384
Likes: 87
From: Horncastle Lincolnshire, England
2023 C5 of the Year Finalist - Unmodified
There are a few sites out there that explain the DIC codes. this one has instructions and a decode:
http://www.97vette.com/howto/codes/index.html
Dont forget when you take a look H means history (fault has cleared) C means current.
It'll probably have thrown a C code.
http://www.97vette.com/howto/codes/index.html
Dont forget when you take a look H means history (fault has cleared) C means current.
It'll probably have thrown a C code.
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 27,897
Likes: 9
From: I have no tolerence for liberals and fools, but sometimes i repeat myself
CI 3-5-7-8-9 Veteran
St. Jude Donor '08
found it listed, has to do with the YAW sensor. Where is that damned thing located at (I'm sure its in the dash)
