Brake Fluid-
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 43,151
Likes: 45
From: Gaithersburg Maryland
CI 6-7-8 Veteran
St. Jude's Donor '06-'10-'11, '15
Brake Fluid-
Cap says use DOT 3-however I've been told to use DOT 5 due to my (ahem) spirited driving habits. Any advice?
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
Originally Posted by VatorMan
Cap says use DOT 3-however I've been told to use DOT 5 due to my (ahem) spirited driving habits. Any advice?
Never Use Dot 5 - End Of Discussion
Last edited by Wicked Weasel; Aug 15, 2006 at 10:46 AM.
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
BTW if you need better fluid because you are hard on your brakes then you can move up to a racing fluid that has better wet and dry boiling points.
I run ATE Super Blue Racing fluid with Racing Brake Pads and never experience brake fade.
I would think though Valvoline Synthetic Dot 3-4 is good enough for most street driving even some aggressive driving.
Make sure to bleed your entire system when putting new in.....
I run ATE Super Blue Racing fluid with Racing Brake Pads and never experience brake fade.
I would think though Valvoline Synthetic Dot 3-4 is good enough for most street driving even some aggressive driving.
Make sure to bleed your entire system when putting new in.....
Burning Brakes
Joined: Apr 2004
Posts: 792
Likes: 1
From: Stanfield NC
Get off the DOT 5 and use a quality(hi wet boiling point) fluid like Motul. I don't know of any of the track guys who would even consider using DOT 5 and the car would probably be rejected in tech inspeciton if it were know that DOT 5 was in use.
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Originally Posted by Wicked Weasel
Never Use Dot 5 - End Of Discussion
Never DOT 5. Only Dot 3 or DOT4.Dot 5 is silicone based and does not lubricate teh ABS system. and when water gets into the brake system if forms little bubbles and foams up when hot. Your bakes go . . . . .
and you in your car go 
Melting Slicks
Joined: May 2000
Posts: 2,498
Likes: 4
From: Brentwood TN
Actually, when the brakes...
Originally Posted by AU N EGL
Never DOT 5. Only Dot 3 or DOT4.Dot 5 is silicone based and does not lubricate teh ABS system. and when water gets into the brake system if forms little bubbles and foams up when hot. Your bakes go . . . . .
and you in your car go 
Charlie
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Originally Posted by cruisemon
away because the DOT 5 bubbled and compressed, we need an emoticon of a smiley head taking a dump, not banging his head.
Charlie
Charlie
Well I hope I dont get a warring or the boot for these:
S*** hitting the fan
Others were a bit too . . .
And of course every race likes too see this one
Burning Brakes
Joined: Aug 2000
Posts: 1,132
Likes: 1
From: Morganton, NC, USA
Congratulations on seekiing advice on this forum: that's what it's for. We should all take heart and not automatically and blindly follow advice on any subject given by a person, whenever we do not absolutely know how much expertise he has on the subjcet.
