Headlamp switch
Thread Starter
Drifting
Joined: Feb 2004
Posts: 1,829
Likes: 45
From: Las Vegas Nevada
Headlamp switch
I need to replace my headlamp switch. It appears that I need to
remove the steering wheel in order to remove the steering
column shroud to access the switch for removal and replacement.
Can anyone provide me the correct procedure to get this done
and have working headlamps again? I would rather do it myself
than take it to the stealership ( or anyone else).
Thank You in advance
remove the steering wheel in order to remove the steering
column shroud to access the switch for removal and replacement.
Can anyone provide me the correct procedure to get this done
and have working headlamps again? I would rather do it myself
than take it to the stealership ( or anyone else).
Thank You in advance
Racer
Joined: Aug 2005
Posts: 361
Likes: 1
From: Montara Ca
You do NOT need to pull the airbag/steering wheel but there is one screw on the bottom of the Multifunction switch that is a PITA. Attached is a prity good wright up.
http://forums.corvetteforum.com/show...unction+switch
http://forums.corvetteforum.com/show...unction+switch
