Coilover adjustment issues!???
Sep 17, 2006 | 09:30 PM
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
Coilover adjustment issues!???
Im giving up on these and buying new ones, 1500 if anyone wants them
Ive spent the last day trying to set my coil overs to be somewhat the same setup. Ive installed and removed them 3 times, set them up and measured them on a bench and when reinstalled I have a 1/2in - 3/4 in difference in ride height from left to right.
Everything goes in identical but ends up way off.
????????????????????????
Last edited by BaneZ06; Sep 18, 2006 at 09:51 PM .
Sep 18, 2006 | 12:44 AM
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
Who's coilover's do you have ?
Where are measuring from ?
You should verify that you are on level ground. All measurements should be to the frame and not the fenders.
If you off only remove the one you want to adjust and make change.
Sep 18, 2006 | 03:49 AM
Le Mans Master
Joined: Dec 2003
Posts: 5,561
Likes: 448
From: Atlanta metro Ga.
On my DRM's I carefully measured the spring preload (from the last thread to the bottom of the adjustment collar) and the ride height is dead-on even.
Sep 18, 2006 | 05:59 AM
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
I have the DRMs as well and thats the same way im measuring them and it still comes out to be off.
Sep 18, 2006 | 12:06 PM
Le Mans Master
Joined: Dec 2003
Posts: 5,561
Likes: 448
From: Atlanta metro Ga.
Did you check to see if the springs supplied were the same side to side (hard to believe Randy would have missed that).
Not sure what's going on here, unless your sway bars are loading the suspension for some reason.
Sep 18, 2006 | 01:42 PM
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
IM going to take the swaybar off tonight and try everything without it on.
Sep 18, 2006 | 09:51 PM
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
nothins workin theyre coming off and getting sold
1500 if anyone wants them
Sep 18, 2006 | 10:02 PM
Advanced
Joined: Jun 2005
Posts: 59
Likes: 0
From: marietta ga
Quote:
Originally Posted by Dan_the_C5_Man
On my DRM's I carefully measured the spring preload (from the last thread to the bottom of the adjustment collar) and the ride height is dead-on even.
how do u like the coil overs? how do they compare to the t1 setup? what sway bars are u using? do u want to go to the mtns sunday?
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Sep 18, 2006 | 10:35 PM
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
Quote:
Originally Posted by ZeeOhhSixx
nothins workin theyre coming off and getting sold
1500 if anyone wants them
Don't be so fast tempered. If I were home I would give you hand but at the momement I'm 3500 miles away in Vancouver, BC.
I posted a link to a local shop that could help you.
http://www.phoenixperformanceinc.com/
Sep 18, 2006 | 11:19 PM
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
have you called DRM and ask Randy for some tips?
Sep 19, 2006 | 05:38 PM
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
Something just isn't right here at all. Please call me here at the shop or on my cell phone that I am going to pm you. I will help you or take them back for a full refund which ever way you would like. Sorry I didn't see this sooner.
Randy
763-477-9272
Sep 19, 2006 | 05:48 PM
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
I don't ave DRM coil overs but I run against cars that do and they do work great. Randy will get it right for you.