When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The other day I turned off the climate control system and noticed the engin temperature start to climb. Before it got over 220* I turned the system back on and the temp came down.
I just got HP Tuners and the first thing I looked at was the Fan temps. Fan #1 was set to come on at 226* and Fan #2 at 235*. That seems very high to me. Anybody have any recomendations? I took them down to 210* and 220* to make me feel better.
I will probably put in a 160* thermostat and lower them again but was just wondering if anybody had an opinion about this..
I have the Vinci switch, both fans come on low at the same time. I have them set to come on at 207 and off at 201. I found this allows the oil temp to get into the 200-210 degree range, which is right where I want it. On the highway it runs at 190-192.