Power Windows Stopped Working
Thread Starter
7th Gear
Joined: Sep 2006
Posts: 7
Likes: 0
Power Windows Stopped Working
Well I fear I somehow caused this problem while fixing another problem. I pulled both DCMs to fix the power locks and now all the power locks work great. After fixing the passenger side I put the DCM back in to test the locks and noticed the power window no longer worked on the passenger side. The drivers side still worked. I then replaced the locking relays on the drivers DCM and the same problem occurred. So now I have fully functional locks and neither window works. I even ordered another drivers DCM to see if I somehow screwed something up on the board while desoldering the relays and I still have the same issue with the replacement DCM. Any ideas on what I screwed up that would cause the door to still have power but when I press the power window switches nothing, not even a click, happens? Please help!
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
You could have disturbed the two door wiring harness connectors that live inside the accordion tube between the body and the door. Just remove the tube and Look to see if one or more of the wires are bare:
Also check to see if there any dirty, corroded or damaged pins.
BC
Also check to see if there any dirty, corroded or damaged pins.
BC
