Ebay Catback???
Burning Brakes
Joined: Jun 2006
Posts: 1,196
Likes: 0
From: St. Louis Missouri
You get what you pay for...
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Racer
Joined: Nov 2006
Posts: 267
Likes: 0
From: Hermosa Beach CA
You get what you pay for...
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Advanced
Joined: Jan 2007
Posts: 87
Likes: 0
From: Tuscaloosa Al
I get what I pay for!!!!! I got the ecklers catalog today and they have this SAME EXHAUST (The description is word for word of the one on Ebay, same pics as well) for 600 bucks plus shipping.
So I guess if I buy it from them then it will work better?! Yeah OK!
I support taking down the Corvette TAXES!!!!!
So I guess if I buy it from them then it will work better?! Yeah OK!
I support taking down the Corvette TAXES!!!!!
Instructor
Joined: Jan 2006
Posts: 103
Likes: 2
From: Boynton Beach Florida
2018 C6 of Year Finalist
I have these on my car. Looks good sounds great, I also put on an x pipe. That helped with the drone somewhat. It sounds louder inside the car than it does on a driveby.
Pro
Joined: Oct 2004
Posts: 514
Likes: 2
You get what you pay for...
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Here are some borla stingers to compare:
http://www.youtube.com/watch?v=2S9Qso8C25E
Burning Brakes
Joined: Oct 2004
Posts: 931
Likes: 35
From: Rowlett, Texas
I think you certainly get what you pay for if you buy a used Ti exhaust here on the Forum - assuming that is the sound you like, of course.
Exhaust is so subjective, and it's great to have a group like this that share their experiences, and pass around good used parts for reasonable prices. You might watch the Sale section for awhile and find just what you want from a buddy on the Forum.
DG
Exhaust is so subjective, and it's great to have a group like this that share their experiences, and pass around good used parts for reasonable prices. You might watch the Sale section for awhile and find just what you want from a buddy on the Forum.
DG
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Melting Slicks
Joined: Sep 2006
Posts: 2,721
Likes: 104
From: Florida
Ok, I finally got done with the install just a minute ago.
A few thoughts on this project. I have a good friend help you out on this!! If you get this exhaust, invest in some better T-bolt clamps. I had 2 of the 6 come with bad bolt threads on them. I had to get my buddy to drive me over to a GoodYear store for better ones.
Without the use of a lift, and w/o dropping the suspension we had to cut the stock axle pipes with a sawzall to get the stock ones off.
Most of the install was straight forward, a great amount of time was aligning the tips the best i could.
When it was all buttoned up first start up to check for leaks, I was like DAMN!!!
This is what a vette should sound like stock!! Turns out my stock side H-pipes on one side the weld is cracked so i need to get a bead done on that.
Conclusion, for what i spent i'm pleased with my purchase. Just need better clamps. I'll try and get a video of it soon.
A few thoughts on this project. I have a good friend help you out on this!! If you get this exhaust, invest in some better T-bolt clamps. I had 2 of the 6 come with bad bolt threads on them. I had to get my buddy to drive me over to a GoodYear store for better ones.
Without the use of a lift, and w/o dropping the suspension we had to cut the stock axle pipes with a sawzall to get the stock ones off.
Most of the install was straight forward, a great amount of time was aligning the tips the best i could.
When it was all buttoned up first start up to check for leaks, I was like DAMN!!!
This is what a vette should sound like stock!! Turns out my stock side H-pipes on one side the weld is cracked so i need to get a bead done on that. Conclusion, for what i spent i'm pleased with my purchase. Just need better clamps. I'll try and get a video of it soon.
