Help on Intake/Map install
Thread Starter
Drifting
Joined: Nov 2004
Posts: 1,895
Likes: 0
From: Lee's Summit MO
Help on Intake/Map install
I pulled the intake back off today , and I think a bad harness plug is the culprit on my KS1 error.
Anybody have any tips on how to re-connect the 1/4" vacuum line to the MAP sensor,
The darn thing isn't long enough for me to get my hands back there and make the connection. I'm pretty sure this is the cause of my other issues.
Thanks in advance
Anybody have any tips on how to re-connect the 1/4" vacuum line to the MAP sensor,
The darn thing isn't long enough for me to get my hands back there and make the connection. I'm pretty sure this is the cause of my other issues.
Thanks in advance
Burning Brakes
Joined: Apr 2005
Posts: 834
Likes: 0
From: Palm Beach Gardens FL
just measure it with calipers or a ruler if you don't have that. I put mine in as far as I could then forced my hand back there. Guess you are going to have to find a friend with smaller hands.
