Bench bleeding clutch - Assembled Installation
Thread Starter
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Bench bleeding clutch - Assembled Installation
Have been doing a lot of searching (my wife is not a happy camper 
) about installing a clutch. Not sure at this point if I want to take it on as the car will be down so long. Anyhow, has anyone bench bled the master/slave setup and then installed it in the car as a complete setup?
) about installing a clutch. Not sure at this point if I want to take it on as the car will be down so long. Anyhow, has anyone bench bled the master/slave setup and then installed it in the car as a complete setup?
Melting Slicks
Joined: Jul 2006
Posts: 2,088
Likes: 2
From: tampa florida
Vette, I found that when I did mine there were a lot of little details that I was gald I was the one making sure they were done correctly. To me, most people who work on cars have other vehicles waiting and just want to get mine done to get to the next one.
(Disclaimer: I know this does not apply to everyone)
That combined with the satisfatcion of doing the job myself, of course the cost savings and what I learned about the car equals a very rewarding experience. Shoot if I had to, I'd do it again in a heartbeat.
2 cents deposited.
Brad
(Disclaimer: I know this does not apply to everyone)
That combined with the satisfatcion of doing the job myself, of course the cost savings and what I learned about the car equals a very rewarding experience. Shoot if I had to, I'd do it again in a heartbeat.
2 cents deposited.
Brad
