Wheel spacers... where to get them?
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
We sell a ton of GM style wheel spacers. They are machined for a good solid fit. We also send them out for hard coat for a long lasting good looks. You can find them on our website or are e-bay store.
Thanks
Randy
www.dougrippie.com
763-477-9272
Thanks
Randy
www.dougrippie.com
763-477-9272
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Steve you are correct. Longer ARP studs IMHO should be used with any spacer. I use a 3/8 CCW spacer on long ARP studs, NAPA hardened open ended lug nuts.
Thread Starter
Burning Brakes
Joined: Feb 2006
Posts: 1,085
Likes: 3
From: Ottawa Ontario, Canada
Do your spacers center on the hub and still allow the wheel to center on the spacer? I measured the hubs and it seems the surface for the wheel to center on is only about 3/8" deep, so with a 3/8" spacer the wheel would only be centered by the studs... I've done this before and had annoying and potentially unsafe vibrations result from that since the wheel won't properly center.
