Hole Shot
Thread Starter
Heel & Toe
Joined: Jun 2007
Posts: 19
Likes: 0
From: Pembroke Ontario
Hole Shot
I'm a new 02 owner, My car is bone stock, power is good but doesen't really jump out of the hole like I think it should! I wiil not light up the tires at all with Trac. Control off. It's an automatic But with the torque and the HP it has I'm a little dissapointed in the bottom end performance Is this normal? Just curious Thanks.........Pat
Drifting
Joined: Aug 2001
Posts: 1,696
Likes: 0
From: SANTA MARIA,CA. formerly Magnolia Texas
St. Jude Donor '08-'09
That is why it feels like it bogs.Need bigger gears(3.15)'s or more and an aftermarket Tq converter 2800 stall or higher and it will feel like a completely different car.jerry
Burning Brakes
Joined: Apr 2007
Posts: 763
Likes: 1
From: Oceanside Ca
Axle Ratio
Look on your Glove Compartment door for the "Service Parts Identification" label.
G90 is a 3.15 axle ratio
GU2 is a 2.73 axle ratio
Both of these are listed as "automatic transmission only" I have trouble breaking much loose with the Traction Control on as well. However I have the 3.15 too, I hope you find the troubles and..Happy Trails!
G90 is a 3.15 axle ratio
GU2 is a 2.73 axle ratio
Both of these are listed as "automatic transmission only" I have trouble breaking much loose with the Traction Control on as well. However I have the 3.15 too, I hope you find the troubles and..Happy Trails!
Dig
Joined: Jan 2006
Posts: 5,479
Likes: 1,137
From: Port Saint Lucie FLORIDA & HONDURAS
You need gears !! I had the 2:73's and couldnt even squeal the tires. I now have 3:90's and roast them off with ease.
I have a 4:10 rear w/ hardened shaft for sale for $ 550.00 that whines a little when letting off the throttle.
I have a 4:10 rear w/ hardened shaft for sale for $ 550.00 that whines a little when letting off the throttle.
Racer
Joined: Oct 2002
Posts: 473
Likes: 155
From: Palos Heights IL
Cruise-In VIII Veteran
I also have an auto with the stock rear end. I find it very hard to get the rear tires spinning on any surface. The local tuner (FLP) will be installing a new 3.42 rear end in a few weeks. This change along with a basic tune for shift points should really change the low end response and let me burn off a bit of tire tread whenever I want. I will post results after the upgrade.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jul 2004
Posts: 30,045
Likes: 4
From: Danville Virginia
I also have an auto with the stock rear end. I find it very hard to get the rear tires spinning on any surface. The local tuner (FLP) will be installing a new 3.42 rear end in a few weeks. This change along with a basic tune for shift points should really change the low end response and let me burn off a bit of tire tread whenever I want. I will post results after the upgrade.
You will love it. Just had mine done by ECS.
Chuck