Harness suggestions.
Thread Starter
Burning Brakes
Joined: Nov 2004
Posts: 1,240
Likes: 55
Harness suggestions.
I'm considering installing a harness setup and I'm looking for some advice. Without a roll bar are there any which are fairly easy to install (bolt-on) and don't obstruct your rear veiw or sh#t up the interior. I only go to the drags once or twice a season so I'm not sure I should even bother, but I do want to be safe!
Thanks!
Thanks!
Last edited by LAYNLOW; Aug 30, 2007 at 08:04 AM.
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Harness bar. B-K, HardBar, Shark
and a 6 point harness system.
However, you may want to read the discussion on safety items on the Auto-X and Road race forum
HPDE & Racing Safety Gear
and a 6 point harness system.
However, you may want to read the discussion on safety items on the Auto-X and Road race forum
HPDE & Racing Safety Gear
Burning Brakes
Joined: Mar 2007
Posts: 947
Likes: 1
From: Lower Lake Ca
I like the Arizona Speed and Marine bar that I have. It is hardly noticable and comes with camera and extinguisher mounts. It bolts in to the stock shoulder belt locations and retains the stock belts. It also comes with the mounts for the side and sub belts. This is assuming that you have a coupe, I didn't look at your profile.
Thread Starter
Burning Brakes
Joined: Nov 2004
Posts: 1,240
Likes: 55
When I looked at the pic of the harness on AS&M website, there appears to be a bracket, bolted on between the seats near the counsel. The instructions say no drilling, am I missing something?
Thanks!
Thanks!
I like the Arizona Speed and Marine bar that I have. It is hardly noticable and comes with camera and extinguisher mounts. It bolts in to the stock shoulder belt locations and retains the stock belts. It also comes with the mounts for the side and sub belts. This is assuming that you have a coupe, I didn't look at your profile.
