ground issue

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2007 | 07:12 PM

bayarea

Thread Starter

Drifting

Joined: Jan 2005

Posts: 1,271

Likes: 1

From: V town california

ground issue

im in the process of hooking stuff back up and right now i have one ground hooked up to the drivers side head, 2 on the side of the drivers side block, and 1 ground along with neg batt cable hooked up on pass side block.

isnt there supposed to be a ground or 2 on the pass side head? if so where is it at lol.

car is a 2000

Oct 15, 2007 | 07:17 PM

corvettedoug

Racer

Joined: Sep 2006

Posts: 389

Likes: 1

From: Roswell GA

You have the negative batter cable right above the starter on the passenger side block. Not sure if you got that one already.

Oct 15, 2007 | 07:31 PM

bayarea

Thread Starter

Drifting

Joined: Jan 2005

Posts: 1,271

Likes: 1

From: V town california

Quote:

Originally Posted by corvettedoug

You have the negative batter cable right above the starter on the passenger side block. Not sure if you got that one already.

ya i got that along with a small ground underneath it.

thing is that the block i have is an lq9 and there is no were to put the neg batt cable right above the starter so i had to stretch them over to the next hole and im afraid the header will melt them.

any advise on the pass side head ground? is there any or is it just the wire harness holder?

Oct 16, 2007 | 10:12 AM

bayarea

Thread Starter

Drifting

Joined: Jan 2005

Posts: 1,271

Likes: 1

From: V town california

from what i see on bill curlys sticky there is no ground on pass side head correct?

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump