Front Fascia install help!
Thread Starter
Racer
Joined: May 2006
Posts: 410
Likes: 1
From: NJ
Front Fascia install help!
Hey guys, got my stock front fascia off with no problem, now working on installing my tigershark fascia. Question though, my passenger side where the bumper meets the quarter panel is off like the panel like bumps out, is there anyway to adjust that quarter panel?...if its hard to visualize let me know I'll post a pic. Thanks in advance!
Le Mans Master
Joined: Mar 2005
Posts: 5,811
Likes: 31
From: Minnetonka MN
St. Jude Donor '06
this is why you need a body shop guy to test fit the panel before paint. they usually mark the high and low spots and add bondo to make it level. this is what you're seeing.
only way to adjust is to pressure fit it in place and bolt it down quick, pray it holds in its place. its a two man job, thats for sure! good luck man!
Aj
only way to adjust is to pressure fit it in place and bolt it down quick, pray it holds in its place. its a two man job, thats for sure! good luck man!
Aj
