Who makes stroker kits?
Thread Starter
Racer
Joined: Apr 2001
Posts: 328
Likes: 0
Who makes stroker kits?
Hello all, I got a friend that wants to do a stroker kit on his car and he wants to find out who makes stroker kits for the LS1. He wants to do it himself as he's been building engines for close to 20 years. Any leads would be greatly appreciated!
Thanks!
Thanks!
Le Mans Master
Joined: Apr 1999
Posts: 7,820
Likes: 0
From: Burlington ON
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: Who makes stroker kits? (T66Supra)
ARE (Agostino Racing Engines) can assemble a Stroker package for your friend with all the parts he would need to build whichever motor he chooses. There are quite a few details that would need to be discussed to get exact pricing but I promise our pricing is very competitive. Drop me an email if you are interested.
Thread Starter
Racer
Joined: Apr 2001
Posts: 328
Likes: 0
Re: Who makes stroker kits? (MattG)
Thanks for the response Matt. I'll be emailing you and copying my friend. However he likes to build the motors himself, maybe you guys can work something out where he gets the parts from you or something.
Thanks!
Anyone else know of any stroker kits?
Thanks!
Anyone else know of any stroker kits?
Drifting
Joined: Apr 2001
Posts: 1,773
Likes: 0
From: Norman Oklahoma
Re: Who makes stroker kits? (T66Supra)
Anyone else know of any stroker kits?
Jerry
Drifting
Joined: Oct 2000
Posts: 1,957
Likes: 1
From: Albuquerque NM
Re: Who makes stroker kits? (T66Supra)
Check the links on the right side of the page. LGmotorsports is there. I think a lot of those links have stroker packages. Biggest I have seen is a 432 from ARE. I think someone (can't remember who) actually got 454 ci out of an LS1.
Burning Brakes
Joined: Apr 1999
Posts: 1,150
Likes: 0
From: Saratoga CA
Re: Who makes stroker kits? (flynbludream)
Check the links on the right side of the page. LGmotorsports is there. I think a lot of those links have stroker packages. Biggest I have seen is a 432 from ARE. I think someone (can't remember who) actually got 454 ci out of an LS1.
99 C5 M6
Melting Slicks
Joined: Jun 2001
Posts: 2,743
Likes: 3
From: Davie Florida
Re: Who makes stroker kits? (akw408)
Checkout Lunati, they sell a kit that will give you a 383 cu. inch motor for $3650.00. The kit has all forged steel parts (crank,rods and pistons). You can order it with pistons that are as much as .060 over.
[Modified by Mitch C, 11:44 PM 1/21/2002]
[Modified by Mitch C, 11:44 PM 1/21/2002]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Apr 1999
Posts: 7,820
Likes: 0
From: Burlington ON
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: Who makes stroker kits? (T66Supra)
Thanks for the response Matt. I'll be emailing you and copying my friend. However he likes to build the motors himself, maybe you guys can work something out where he gets the parts from you or something.
Drifting
Joined: Apr 2001
Posts: 1,773
Likes: 0
From: Norman Oklahoma
Re: Who makes stroker kits? (Mitch C)
Checkout Lunati, they sell a kit that will give you a 383 cu. inch motor for $3650.00. The kit has all forged steel parts (crank,rods and pistons). You can order it with pistons that are as much as .060 over.
Jerry
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: Who makes stroker kits? (T66Supra)
The most popular stroker crank for the LS1 is the Lunati produced 4.000" crank used in the 382 CID motors. They also have a 4.125" crank for a all stroke 396 CID motor or for a 427 CID (4.125" stroke X 4.000" bore.) A 4.250" Lunati crank can be had which was used in the mentioned 454 CID motor, but was custom done. Scat and Cola have also recently announced the availability of a 4.000" crank at more competitive price levels than the Lunati pieces. Hope that helps. :cheers:
-Jeremy
-Jeremy
Drifting
Joined: Apr 2001
Posts: 1,773
Likes: 0
From: Norman Oklahoma
Re: Who makes stroker kits? (Godspeed)
Scat and Cola have also recently announced the availability of a 4.000" crank at more competitive price levels than the Lunati pieces.
Jerrry
