Brake Fluid Sensor
Thread Starter
Instructor
Joined: Feb 2008
Posts: 114
Likes: 0
From: Bakersfield CA
Help!! Brake Fluid Sensor
My brake fluid sensor went out on my 02 and I got the new one but I cant figure out how to change it. Do I need to drain the master cylinder?
Thanks
Thanks
Last edited by vetteguy0483; Jan 29, 2009 at 07:39 PM.
Racer
Joined: May 2001
Posts: 253
Likes: 3
From: The Woodlands Texas
From the Service Manual:
Removal
1. Disconnect the electrical connector from brake fluid level sensor.
2. Remove the brake fluid level sensor. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove.
Installation
1. Place the brake fluid level sensor into the reservoir, press into place to secure the sensor retaining tabs.
2. Connect the electrical connector to the brake fluid level sensor.
Removal
1. Disconnect the electrical connector from brake fluid level sensor.
2. Remove the brake fluid level sensor. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove.
Installation
1. Place the brake fluid level sensor into the reservoir, press into place to secure the sensor retaining tabs.
2. Connect the electrical connector to the brake fluid level sensor.
