What mod next?
Thread Starter
Instructor
Joined: Jun 2009
Posts: 167
Likes: 0
What mod next?
i have an 01 410rwhp
ads4 cam 228 232, double valve springs, and chromoly pushrods
lg streets, no cats, and varam, proted ls6 intake and ported tb
stock ti's
origional clutch
NOW.........
what should i buy?
i want something that will make my car the most faster, would also be awsome to get a little more thump/ sound out of the car
heads/nitrous/ FI is out of the question for now, and ill be doing the clutch over winter
i also plan on buying agressive tires in the near future
i think my options are
fast 92 with ls2 TB $1300, should make about 15more peak hp, and prolly .3 thenths
underdrive pully-$200, 10hp, awsome mod, plus better gas milage, but a BITCH to install, probably more than i should attempt to take on.
1.8 yella terra's- $450-im guessing 12hp, but not so sure that they will fit with my cam.
i cannot think of anything else to squeze some extra Ponies out of this thing, any input?
ads4 cam 228 232, double valve springs, and chromoly pushrods
lg streets, no cats, and varam, proted ls6 intake and ported tb
stock ti's
origional clutch
NOW.........
what should i buy?
i want something that will make my car the most faster, would also be awsome to get a little more thump/ sound out of the car
heads/nitrous/ FI is out of the question for now, and ill be doing the clutch over winter
i also plan on buying agressive tires in the near future
i think my options are
fast 92 with ls2 TB $1300, should make about 15more peak hp, and prolly .3 thenths
underdrive pully-$200, 10hp, awsome mod, plus better gas milage, but a BITCH to install, probably more than i should attempt to take on.
1.8 yella terra's- $450-im guessing 12hp, but not so sure that they will fit with my cam.
i cannot think of anything else to squeze some extra Ponies out of this thing, any input?
Pro
Joined: Jul 2008
Posts: 553
Likes: 0
From: Toronto Ontario
Larger cam (ie G5X3), under drive pully, and Trick Flow/AFR heads. With another tune you should be at 440 rwhp. Without the heads and the same setup I made 420 rwhp. No reason why a quality head would not give you 20 extra to the wheel.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Racer
Joined: Aug 2008
Posts: 404
Likes: 0
From: NYC
would definitely make you faster and probably get you the 3 tengths, wont make you any louder tho...
Drifting
Joined: Nov 2003
Posts: 1,539
Likes: 3
From: South al
I would put the gear in it no questions about it.motive gear & a hardend shaft from lingenfelter,look up westcoast differintal,I bought my 3.73 there & paid 334.00 to my ddoor,u also need an bearing kit that u can buy for it as well pm me if u can't find everything u need & I will hoook u up
