Need help with an error code
Thread Starter
4th Gear
Joined: Mar 2010
Posts: 4
Likes: 0
From: Chesterfield Virginia
Need help with an error code
Hi folks! I recently replaced the oil pressure sensor, using the remove the intake method. Things went well, except for the small vacuum liine that connects to the back of the intake. It looked like it was broken/cracked before I touched it. Anyway, I have a new one ordered and I made a repair on the old one, to bide time until the new one is in.
Now, since it is all back together, I have had the check engine light to come on. I have a scan tool. It showed an error code P0410 ( sec air injection malfunction). I have checked things that I disconnected to ensure nothing was lose or left undone. I reset the code and it stayed off for a short period then came back on. I drove from Richmond to Charlotte yesterday and it came back on. I reset it again before coming home today and it stayed off for about 180 miles. Yep, it came on again!
Can anyone give me a solution to this problem?
2000 coupe LS1
Thanks, Jay
Now, since it is all back together, I have had the check engine light to come on. I have a scan tool. It showed an error code P0410 ( sec air injection malfunction). I have checked things that I disconnected to ensure nothing was lose or left undone. I reset the code and it stayed off for a short period then came back on. I drove from Richmond to Charlotte yesterday and it came back on. I reset it again before coming home today and it stayed off for about 180 miles. Yep, it came on again!
Can anyone give me a solution to this problem?
2000 coupe LS1
Thanks, Jay
Last edited by 32sunsation; Mar 19, 2010 at 11:30 PM. Reason: left out info
Tech Contributor
Joined: Jan 2007
Posts: 19,360
Likes: 1,128
From: Dyer, IN
Hi folks! I recently replaced the oil pressure sensor, using the remove the intake method. Things went well, except for the small vacuum liine that connects to the back of the intake. It looked like it was broken/cracked before I touched it. Anyway, I have a new one ordered and I made a repair on the old one, to bide time until the new one is in.
Now, since it is all back together, I have had the check engine light to come on. I have a scan tool. It showed an error code P0410 ( sec air injection malfunction). I have checked things that I disconnected to ensure nothing was lose or left undone. I reset the code and it stayed off for a short period then came back on. I drove from Richmond to Charlotte yesterday and it came back on. I reset it again before coming home today and it stayed off for about 180 miles. Yep, it came on again!
Can anyone give me a solution to this problem?
2000 coupe LS1
Thanks, Jay
Now, since it is all back together, I have had the check engine light to come on. I have a scan tool. It showed an error code P0410 ( sec air injection malfunction). I have checked things that I disconnected to ensure nothing was lose or left undone. I reset the code and it stayed off for a short period then came back on. I drove from Richmond to Charlotte yesterday and it came back on. I reset it again before coming home today and it stayed off for about 180 miles. Yep, it came on again!
Can anyone give me a solution to this problem?
2000 coupe LS1
Thanks, Jay
http://forums.corvetteforum.com/c5-t...ck-valves.html
