V1 Settings
Le Mans Master
Joined: Apr 1999
Posts: 7,820
Likes: 0
From: Burlington ON
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: V1 Settings (ICULUKN-C5)
These are settings for the Logic Mode settings. This mode helps filter out interference that will lead to false alarms.
The big L means FULL LOGIC MODE which filters out as much as it can. The half L means HALF LOGIC MODE which doesnt filter quite as much as the full mode. The A means that ALL readings are monitored and there is no filtering taking place.
I usually run the HALF LOGIC MODE all the time and sometimes switch to FULL LOGIC MODE when in the city.
The big L means FULL LOGIC MODE which filters out as much as it can. The half L means HALF LOGIC MODE which doesnt filter quite as much as the full mode. The A means that ALL readings are monitored and there is no filtering taking place.
I usually run the HALF LOGIC MODE all the time and sometimes switch to FULL LOGIC MODE when in the city.
Drifting
Joined: Feb 2000
Posts: 1,882
Likes: 0
From: San Diego CA
Re: V1 Settings (shftn6)
You can also turn off certain bands or otherwise modify how the default settings work, which will display a "P" at start up meaning "programmed" mode. This is in addition to the L, l and A modes. The P will go away after a few moments and then only the appropriate mode setting will display.
I've programmed out X band (and I'm thinking of dropping laser too due to the falses from the high intensity LED brake lights) and run the V1 in A mode.
Pete
I've programmed out X band (and I'm thinking of dropping laser too due to the falses from the high intensity LED brake lights) and run the V1 in A mode.
Pete
