car broke last night code help
Thread Starter
Advanced
Joined: Jan 2010
Posts: 80
Likes: 0
From: stratford ct
car broke last night code help
service light came on last nite do these code mean anything to anybody. car still runs . the only thing that i see is , voltage seems low 12s nothing over 13.1 if that's any help jim v
borfa c2120 h c
bo521 h
u1160 h
po751 h c
p1626 h
borfa c2120 h c
bo521 h
u1160 h
po751 h c
p1626 h
Tech Contributor
Joined: Dec 2006
Posts: 10,962
Likes: 29
From: Van Buren Arkansas
Wounded Warrior Escort '11
C2120 TPM System Malfunction (No Sensors Received)
U1160 Loss of Communications with LDCM
P1626 Theft Deterrent System Fuel Enable Circuit
The P0521 code isn't in the normal list but shows problems with your oil pressure sender. What is the oil pressure reading? Similarly not seeing the P0751 code but it shows issues for a shift solenoid, generally speaking.
Low voltage will cause all sorts of issues as you need a minimum of 12.5 static with the ignition off, for the computers to run. So you might want to check into that area first, clear the codes, then check them again...after fixing the voltage issues...bad battery connections, battery age, starter solenoid battery connections...
U1160 Loss of Communications with LDCM
P1626 Theft Deterrent System Fuel Enable Circuit
The P0521 code isn't in the normal list but shows problems with your oil pressure sender. What is the oil pressure reading? Similarly not seeing the P0751 code but it shows issues for a shift solenoid, generally speaking.
Low voltage will cause all sorts of issues as you need a minimum of 12.5 static with the ignition off, for the computers to run. So you might want to check into that area first, clear the codes, then check them again...after fixing the voltage issues...bad battery connections, battery age, starter solenoid battery connections...
Thread Starter
Advanced
Joined: Jan 2010
Posts: 80
Likes: 0
From: stratford ct
C2120 TPM System Malfunction (No Sensors Received)
U1160 Loss of Communications with LDCM
P1626 Theft Deterrent System Fuel Enable Circuit
The P0521 code isn't in the normal list but shows problems with your oil pressure sender. What is the oil pressure reading? Similarly not seeing the P0751 code but it shows issues for a shift solenoid, generally speaking.
Low voltage will cause all sorts of issues as you need a minimum of 12.5 static with the ignition off, for the computers to run. So you might want to check into that area first, clear the codes, then check them again...after fixing the voltage issues...bad battery connections, battery age, starter solenoid battery connections...
U1160 Loss of Communications with LDCM
P1626 Theft Deterrent System Fuel Enable Circuit
The P0521 code isn't in the normal list but shows problems with your oil pressure sender. What is the oil pressure reading? Similarly not seeing the P0751 code but it shows issues for a shift solenoid, generally speaking.
Low voltage will cause all sorts of issues as you need a minimum of 12.5 static with the ignition off, for the computers to run. So you might want to check into that area first, clear the codes, then check them again...after fixing the voltage issues...bad battery connections, battery age, starter solenoid battery connections...
my oil pressurer is between 40+ AND 70+ I have a lingenfelter car so some of the readings are diff from stock
Last edited by jv01; May 16, 2011 at 08:39 PM.
