DIY Jacking pucks
Sep 23, 2011 | 04:19 PM
Burning Brakes
Joined: Sep 2009
Posts: 1,180
Likes: 2
From: Yes it's hot! Arizona
Quote:
Originally Posted by
Gigdy
Buy some for a bmw. Put them in and leave them
Might have to order a set.
Sep 23, 2011 | 05:32 PM
Melting Slicks
Joined: Jun 2004
Posts: 2,453
Likes: 81
From: Fishin' Pole FL
Quote:
Originally Posted by
2slicks1vette
Now I know it's probably best to let a professional make these complicated pucks, but I decided to use one of the guides on here to make my own pucks.
Each puck was $1.69 from my local sporting goods store + $0.49 for eye hook screws from the local hardware store.
Not bad for $8.72 total + tax.
What I did was hold the puck in my left hand, and then utilizing my right hand, I screwed the eyehooks into the pucks.
The screws stuck out a little so I had to nip off the ends, that part was pretty scary.
Thanks to this forum for allowing me to take on this complicated project!
I want some too but I'm left handed.
Sep 23, 2011 | 05:34 PM
Burning Brakes
Joined: Sep 2011
Posts: 1,196
Likes: 1
From: Norwich CT
Maybe I am over thinking this but what size eye hook screw did you use??
Thanks
Sep 25, 2011 | 02:43 PM
Burning Brakes
Joined: Sep 2011
Posts: 1,196
Likes: 1
From: Norwich CT
Quote:
Originally Posted by
skeeters65
Maybe I am over thinking this but what size eye hook screw did you use??
Thanks
Anyone I am wanting to get these done this weekend..
Thanks
c5 ,
corvette ,
corvettes ,
diy ,
hard ,
jack ,
jacking ,
lift ,
lifting ,
making ,
puck ,
pucks ,
puks ,
rubber ,
slip