C5 Random Stalling
Thread Starter
Heel & Toe
Joined: Dec 2011
Posts: 18
Likes: 0
From: Butler, NJ
C5 Random Stalling
I hope someone can help!! I recently purchased 1998 coupe, I've been having problems with it stalling randomly. I'll start the engine, shift it into gear, as I release my foot from the brake the engine stalls. It will start up with no problem and idle. I have pressed and released the brake while in park and it continues to run fine. I've shifted it into neutral and released the brake and it runs fine. I put it into gear and release the brake and it stalls. I have to restart the engine several times before it will run with out stalling. This doesn't happen all the time, it has occured when the engine is cold and has occured when its been running for a while. Ufortunately I've had to a mechanic and it hasn't occured while he's had it. I just replace the gas filter, has anyone experienced the same, this is very frustrating.
Thread Starter
Heel & Toe
Joined: Dec 2011
Posts: 18
Likes: 0
From: Butler, NJ
Thank you for the quick response. There is nothing listed on the DIC and when it was in the shop the mechanic said there were no codes showing up on the computer. Its frustrating because its so random, but when it does stall it takes 5 or 6 attempts before it runs.
Thread Starter
Heel & Toe
Joined: Dec 2011
Posts: 18
Likes: 0
From: Butler, NJ
Ok so here are the codes found in the DIC:
28-TCS C1226 H
C1255 H
AO-LDCM B2252 H
B2206 H
B2208 H
B2282 H
B2284 H
B2262 H
B2264 H
U1064 H
U1096 H
A1-RDCM B2237 H
B2239 H
B2253 H
B2203 H
B2205 H
B2283 H
B2285 H
B2263 H
B2265 H
U1064 H
U1096 H
A6-SCM B2192 H
B0851 H
BO-RFA C2120 H C
28-TCS C1226 H
C1255 H
AO-LDCM B2252 H
B2206 H
B2208 H
B2282 H
B2284 H
B2262 H
B2264 H
U1064 H
U1096 H
A1-RDCM B2237 H
B2239 H
B2253 H
B2203 H
B2205 H
B2283 H
B2285 H
B2263 H
B2265 H
U1064 H
U1096 H
A6-SCM B2192 H
B0851 H
BO-RFA C2120 H C
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
7 Bolt-On Upgrades From Extreme Online Store to Level Up Your C6 Corvette
Pouria Savadkouei
How Likely Are These Five 2027 Corvette Rumors to Be True?
Brett Foote
9 Best Corvettes You Can Buy for Half Price (& 1 You Should NEVER Buy!)
Joe Kucinski
8 Very Best Corvettes of Amelia Island 2026
Joe Kucinski
Top 10 WORST Corvette Engineering Failures of All Time!
Joe Kucinski
10 Records the C8 Corvette Generation Has SMASHED (& 1 Glaring Failure)
Joe Kucinski
7 Wildest Corvette Concepts Ever Made
Brett Foote
Tech Contributor
Joined: Jan 2007
Posts: 19,116
Likes: 1,038
From: Dyer, IN
Le Mans Master
Joined: Aug 2005
Posts: 5,375
Likes: 326
From: CA.
St. Jude Donor '13-'14-'15
Very common on cold air intakes for owners or shops to over oil a K&N style filter----
The extra oil is sucked into your MAF and fouls it---The engine will do strange things as the fuel system is getting mis-informaton ---The oil burns onto the tiny MAF wires and does not work properly-----try cleaning the MAF with Brakeclean--clean the screen if it has one -Be careful not to touch the wires or screen----drive it apprx 50 miles for it to relearn the trims---
The extra oil is sucked into your MAF and fouls it---The engine will do strange things as the fuel system is getting mis-informaton ---The oil burns onto the tiny MAF wires and does not work properly-----try cleaning the MAF with Brakeclean--clean the screen if it has one -Be careful not to touch the wires or screen----drive it apprx 50 miles for it to relearn the trims---
Thread Starter
Heel & Toe
Joined: Dec 2011
Posts: 18
Likes: 0
From: Butler, NJ
I want to thank you all for for your advice. I believe the random stalling has been corrected. I had the battery charged, had the ground connections checked, there was no corrosion and changed the fuel filter. One or all of them did the trick. Thank you again for all your help
