AIR elbow connector ejected from header primary
Thread Starter
Drifting
Joined: May 2010
Posts: 1,482
Likes: 2
From: Pearland, TX
AIR elbow connector ejected from header primary
Anybody have this happen before? I was told by the previous owner that the headers are Stainless Works.
It happened while I was on the freeway but I didn't hear it until I slowed down to exit.
Le Mans Master
Joined: May 2007
Posts: 5,393
Likes: 17
From: Belleville Mich.
It happens quite often.
You figure these cars are getting older & older.
From continued vibration, especially if the air tubes are disconnected & have block off plates in their place.
Good luck.
You figure these cars are getting older & older.
From continued vibration, especially if the air tubes are disconnected & have block off plates in their place.
Good luck.
Thread Starter
Drifting
Joined: May 2010
Posts: 1,482
Likes: 2
From: Pearland, TX
The bracket and coils won't bolt down because I have VC spacers and the alternator is in teh way. I have an idea for remounting the coils but I just haven't got around to doing it yet.
I'd be something like this but still on top of the valve cover:
http://www.ws6project.com/user_stor/...7fd3b880397d48
I'd be something like this but still on top of the valve cover:
http://www.ws6project.com/user_stor/...7fd3b880397d48
