Trans cooler options
Thread Starter
Drifting
Joined: Dec 2008
Posts: 1,775
Likes: 8
From: Arma Ks
Trans cooler options
Hey guys. Im in the process of an auto swap and need to get my cooler figured out. I was supposed to get stock lines with my auto but he didn't give them to me. So my options are:
1. Buy stock lines and a cooler (roughly $150)
2. Make the lines and get a cooler (roughly $80)
3. Get braided/hydraulic lines and mount a cooler w/ fan in the back. Maybe inside rear bumper. (roughly $100-150)
1. Buy stock lines and a cooler (roughly $150)
2. Make the lines and get a cooler (roughly $80)
3. Get braided/hydraulic lines and mount a cooler w/ fan in the back. Maybe inside rear bumper. (roughly $100-150)
AMP Racing
Joined: Aug 2006
Posts: 10,755
Likes: 589
From: Washington TWP NJ
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
When I did my swap, I got a Mack daddy trans cooler from summit with a fan and thermostat switch.
I used factory lines to the bell housing and made my own from that point forward to my cooler placed in front of my radiator.
You could certainly make lines right from the trans ports too.
My cooler was $200 and I likely spent $100 on making brackets to mount and making the lines with proper fittings.
Always ran cool.
I used factory lines to the bell housing and made my own from that point forward to my cooler placed in front of my radiator.
You could certainly make lines right from the trans ports too.
My cooler was $200 and I likely spent $100 on making brackets to mount and making the lines with proper fittings.
Always ran cool.
