Extra muffler?
Thread Starter
Instructor
Joined: Jan 2008
Posts: 235
Likes: 0
From: East TX
Extra muffler?
I have LT's, no cats, and Borla XR1 system. The car is a little too loud for me while cruising so I'm thinking about adding a 2nd muffler to the system to quiet it down a little and to reduce the drone. Should I add a second muffler or just swap out the muffler for one that's a little quieter?
I'm thinking about a 2.5" straight through muffler and just adding one to each side. Anyone have any suggestions at to brands? I just need it to drop a few db.
Thanks
I'm thinking about a 2.5" straight through muffler and just adding one to each side. Anyone have any suggestions at to brands? I just need it to drop a few db.
Thanks
Melting Slicks
Joined: Jun 2012
Posts: 3,163
Likes: 6
From: Oceanside California
Safety Car
Joined: Aug 2011
Posts: 4,449
Likes: 409
From: Portland OR
I did it. I knew my Borla's were going to be too loud after H/C/I/E mods, so I added 3" Pypes round muffs after the X before the axle back.
Sounds excellent. I get a lot of compliments at the drag strip. And in general.
These were in process photos, but you get the idea.
I don't notice any drone on the highway. In fact, it is really quiet. Makes good sounds at full song though.
FWIW.....I tend to be a DIY exhaust system geek.......
Ron
Sounds excellent. I get a lot of compliments at the drag strip. And in general.
These were in process photos, but you get the idea.
I don't notice any drone on the highway. In fact, it is really quiet. Makes good sounds at full song though.
FWIW.....I tend to be a DIY exhaust system geek.......
Ron
Safety Car
Joined: Aug 2011
Posts: 4,449
Likes: 409
From: Portland OR
No, I'm sorry I don't. I haven't yet moved to the 21st century with such things as a cell phone or a video camera. 
BTW, these muffs are stainless, polshed, stainless steel packing, and were just over $50 each. They make them in 2.5" in and out as well.
Magnaflow makes an X-pipe with muffs in it as well. You might look into that, although it is designed for stock manifolds and cats.
I wanted to keep my Stinger duals. I like the looks.
Ron
BTW, these muffs are stainless, polshed, stainless steel packing, and were just over $50 each. They make them in 2.5" in and out as well.
Magnaflow makes an X-pipe with muffs in it as well. You might look into that, although it is designed for stock manifolds and cats.
I wanted to keep my Stinger duals. I like the looks.
Ron
