12V hot source location for gauge connection ?
Thread Starter
Instructor
Joined: Sep 2013
Posts: 200
Likes: 13
From: TUCSON Arizona Territory
12V hot source location for gauge connection ?
Silly question but after poking around in the engine compartment of my 2004 Z06 I have not yet found a practical 12V hot source location for gauge wire connection. I am installing electric fuel pressure gauge.
Any recommendations?
EPS
Any recommendations?
EPS
Drifting
Joined: Mar 2011
Posts: 1,412
Likes: 15
From: Richardson TX
Dang I just did this a few months ago.
I do know that a lot of the wiring colors changed around 2001.
I want to say it was a thin blue wire. But it took me A LONG time to find a switched 12+ wire under the dash.
I do know that a lot of the wiring colors changed around 2001.
I want to say it was a thin blue wire. But it took me A LONG time to find a switched 12+ wire under the dash.
Burning Brakes
Joined: Oct 2013
Posts: 859
Likes: 1
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
2004 does NOT have the aux electrical connections in the passengers foot well like the 97-2003 C5s did.
If you look at the C5 ignition switch you will find an unused SWITCHED contact.
It can be used.
Bill
If you look at the C5 ignition switch you will find an unused SWITCHED contact.
It can be used.
Bill
