silly question
Dec 2, 2013 | 09:06 PM
Thread Starter
Advanced
Joined: Dec 2010
Posts: 61
Likes: 0
From: Kingsburg Ca
silly question
What is the wire on the pcv valve, the one that hooks to the bleeder on the engine.New one doesn't have one
Last edited by cookie7; Dec 2, 2013 at 10:22 PM .
Reason: add text
Dec 2, 2013 | 11:15 PM
Melting Slicks
Joined: Jun 2012
Posts: 3,163
Likes: 6
From: Oceanside California
Its a ground for the PCV valve. I dont know why its necessary though.
Dec 3, 2013 | 01:03 AM
Drifting
Joined: Feb 2008
Posts: 1,596
Likes: 67
From: Bahama North Carolina
Quote:
Originally Posted by
NukeC5
Its a ground for the PCV valve. I dont know why its necessary though.
That is because it is not a ground. It is used to transfer heat and warm the pcv valve in cold weather.
Dec 3, 2013 | 11:43 AM
Melting Slicks
Joined: Jun 2012
Posts: 3,163
Likes: 6
From: Oceanside California
Oh, well either way its useless and I ditched that whole setup when installing a catch can.
Dec 4, 2013 | 12:04 AM
Thread Starter
Advanced
Joined: Dec 2010
Posts: 61
Likes: 0
From: Kingsburg Ca
Thanks for the replies,Looks like I'm gonna ditch it too, Same as I bypassed the stupid water line going it the throttle body
Dec 4, 2013 | 03:05 AM
Pro
Joined: Jun 2012
Posts: 633
Likes: 0
From: Van Buren Arkansas
Sounds like a good time to do a LS6 PCV
silly question
