what are the best rockers available?
#1
Safety Car
Thread Starter
what are the best rockers available?
seems like rocker failure is pretty common. for those that have had this, what kind have you replaced them with?
#2
Burning Brakes
Re: what are the best rockers available? (robsvette)
If mine ever fail,I will replace them with Jesel sportsman series rockers......$700 and they are available in different ratios.and the best part is that they are ADJUSTABLE!!!
Tom
Tom
#3
Race Director
Re: what are the best rockers available? (SR71)
I can't imagine rockers breaking on a regular basis. We run 7200rpm non stop, and I have never had one fail. However, when I do, I will also go to Jesel.
Dave
Dave
#4
Melting Slicks
Member Since: Aug 1999
Location: Milwaukee WI
Posts: 2,540
Likes: 0
Received 2 Likes
on
2 Posts
LS1Edit Guru
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Re: what are the best rockers available? (SR71)
If mine ever fail,I will replace them with Jesel sportsman series rockers......$700 and they are available in different ratios.and the best part is that they are ADJUSTABLE!!!
Tom
Tom
I agree that the Jesels are GREAT rockers.. I have a set myself... However, the $700 version are NOT adjustable, the adjustable ones cost nearly double....
Just an FYI.. absolutely no flame intended!!!!!!!!!
#5
Safety Car
Member Since: Dec 2000
Location: God Bless America
Posts: 4,786
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are the best rockers available? (nevrenuf)
I agree that the Jesels are GREAT rockers.. I have a set myself... However, the $700 version are NOT adjustable, the adjustable ones cost nearly double....
Just an FYI.. absolutely no flame intended!!!!!!!!!
Just an FYI.. absolutely no flame intended!!!!!!!!!
#8
Le Mans Master
Member Since: Apr 1999
Location: Burlington ON
Posts: 7,819
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: what are the best rockers available? (howardl)
Rockers are not a common point of failure on an LS1/LS6 in my opinion and are FAR from a necessity.. I have only read about one failure on here that ended up in a dropped valve. Most of the time the rockers are not switched unless the adjustability is needed for a solid roller setup.
#10
Drifting
Re: what are the best rockers available? (cjones)
Do the Jesels (the cheaper version) require machining of the valve covers?
#11
Le Mans Master
Member Since: Jul 2000
Location: Fort Worth Texas
Posts: 7,758
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In II Veteran
Cruise-In III Veteran
Re: what are the best rockers available? (MattG)
Matt, I've seen the needle bearings/rockers fail in more than a few cam and heads/cam cars than I'd like to. Most dont know it until they do an oil change. Not saying its a common issue, but enough to be aware of. The bearings and parts end up in the oil pan.
#12
Team Owner
Re: what are the best rockers available? (robsvette)
While searching for HP and also knowing I would slap on a SC/HC or stroker motor... I installed the Crane 1.8 Full roller rockers. West coast has them on thier website for a refference... Other places (I hear) sell them for less... ;)
vetterdstr :cheers:
vetterdstr :cheers: