Oil Pressure Sensor Relocation Question
Thread Starter
Instructor
Joined: Jan 2014
Posts: 105
Likes: 1
From: Miami FL
Oil Pressure Sensor Relocation Question
I am working in the installation of an oil pressure relocation kit. Does the fitting that installs in place of the oil pressure sensor require teflon tape or does it just rely on the gasket they come with?
Also, is replacement of the sensor described in the GM service manual? If so, I would appreciate some guidance on how to find the procedure .
As always, thanks for your time .
Also, is replacement of the sensor described in the GM service manual? If so, I would appreciate some guidance on how to find the procedure .
As always, thanks for your time .
Team Owner
Joined: Oct 1999
Posts: 31,977
Likes: 487
From: Guinness Its whats for B'fast JAWGA
CI 3-4-5-9 Veteran
AN to AN do not use tape. I used tape on the other connections.
http://ls1tech.com/forums/nitrous-ox...read-tape.html
http://ls1tech.com/forums/nitrous-ox...read-tape.html
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
That fitting is a straight thread, not pipe (tapered) thread. Use the crush washer. No Teflon tape. Btw, the procedure is in the FSM. Be careful on your torque values. I don't recall it at the moment. It MAY be inch pounds.
