throttle actuator control
Thread Starter
Pro
Joined: Oct 2001
Posts: 668
Likes: 26
From: Wadsworth Ohio
throttle actuator control
I lost control on wet road tonight and took down a newspaper box and the metal post holding it up. Wiped out front right fender which needs replaced but bad news is I also wiped out the throttle actuator control. When I get another one is there anything I need to be careful to do when I install the new throttle actuator control? Any feedback on this will be greatly appreciated. Thanks, Tom
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
IF THE CONNECTORS ARE NOT DAMAGED,, Its an easy swap. I would check ALL the wiring and the vacuum lines in that area.
Is the PCM/TAC bracket still in tack??
BC
Is the PCM/TAC bracket still in tack??
BC
Thread Starter
Pro
Joined: Oct 2001
Posts: 668
Likes: 26
From: Wadsworth Ohio
I was able to limp the car 1 mile to my Mom's house and going down in the morning to remove the TAC unit and will check it out better. Thanks for the pictures.
Safety Car
Joined: Jun 2000
Posts: 4,870
Likes: 25
From: Long Island, NY
Feel free to review my post for the TAC installation:
https://www.corvetteforum.com/forums...-pictures.html
https://www.corvetteforum.com/forums...-pictures.html
