new TC and powerloader programming shift points
Thread Starter
Burning Brakes
Joined: Mar 2002
Posts: 1,176
Likes: 0
From: highland village texas
new TC and powerloader programming shift points
Got my reprogrammed powerloader back, installed Yank3200 and 3:42 gears. But shifts are to early (around 5700rpms 37mph and 75mph). I held in first/2nd gear to 6000rpm and speed was 43mph and 83mph. Question is this correct why to determine desired shift point mph/rpm (?) Would this method be the same as WOT. (?) --- I am sending back to Steve Cole for re-programming (again) and i want to make sure it gets done correct. Thanks.
Melting Slicks
Joined: Apr 2001
Posts: 2,909
Likes: 1
From: Highland Village TX
Re: new TC and powerloader programming shift points (david sanders)
Wish I could help. I know Oceanaire on the forum has a 3200, maybe ask him what his are set at. Look him up on a 'Search".
The Bandit........
The Bandit........
Le Mans Master
Joined: Nov 2000
Posts: 7,294
Likes: 1
From: Coral Springs Florida
Re: new TC and powerloader programming shift points (david sanders)
I am sending back to Steve Cole for re-programming (again) and i want to make sure it gets done correct. Thanks.
Instructor
Joined: Aug 2001
Posts: 192
Likes: 0
From: Virginia Chesapeak
Re: new TC and powerloader programming shift points (david sanders)
Dave, The shift points are set by MPH not RPM. Let Steve know what MPH your car is now shifting, and the MPH you want it to shift at. I had the same problem with my car when I sent my powerloader back to be reprogramed for a converter and 3.42s, my car was shifting at only 5500 RPM.
98 A4
Powerloaded
Donaldson Blackwing
Pro Torque 2400
3.42 Gears
:mad
[Modified by MC98, 4:50 PM 8/26/2002]
98 A4
Powerloaded
Donaldson Blackwing
Pro Torque 2400
3.42 Gears
:mad
[Modified by MC98, 4:50 PM 8/26/2002]
