c5 horn diaphram replacement issue

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2016 | 06:33 PM

theoldmusicman

Thread Starter

Advanced

Joined: Jun 2013

Posts: 93

Likes: 0

From: Center TX

c5 horn diaphram replacement issue

I started today trying to replace the horn diaphram on my c5. I got one of the t30 bolts loose on the back of the steering wheel but the other one feels like the head is stripped out. I can't get my torx bit to bite on it without slipping. Is there any other way to remove the horn assembly?

Feb 24, 2016 | 07:44 PM

theoldmusicman

Thread Starter

Advanced

Joined: Jun 2013

Posts: 93

Likes: 0

From: Center TX

Quote:

Originally Posted by 8VETTE7

According to this thread from some years back the correct Torx is T27 and not T30:

https://www.corvetteforum.com/forums...post1575897541

Thanks, I'll need to check on that. The thread that I looked at about replacing the diapharm said T30.

Last edited by theoldmusicman; Feb 24, 2016 at 07:44 PM.

Mar 5, 2016 | 01:26 PM

theoldmusicman

Thread Starter

Advanced

Joined: Jun 2013

Posts: 93

Likes: 0

From: Center TX

Quote:

Originally Posted by 8VETTE7

According to this thread from some years back the correct Torx is T27 and not T30:

https://www.corvetteforum.com/forums...post1575897541

You were absolutely correct sir. Finally had a chance to get back on it yesterday and the correct Torx is indeed a T27. Both of the videos I watched said T30. Guess you can't believe everything you see on the Internet! It's all fixed and working now. Thanks!

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump