No Blower Motor.
Thread Starter
Instructor
Joined: Mar 2010
Posts: 194
Likes: 3
From: Searcy AR
Blower motor not working. HELP!!
Have a 99 FRC. Got in it today and have no blower motor. I took motor out. It's clean. Jumped 12 volts and it works. I replaced the resistor because I was there. Still have nothing. Checked number 18 fuse and the max 60amp fuse both good. Any help would be appreciated!
Last edited by 94 blackBeast; Jun 30, 2016 at 07:13 PM. Reason: better title
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
What system do you have??? Dual Zone od Manual????
If you replaced a RESISTOR MODULE,,, You have a MANUAL SYSTEM! Was the resistor/s SMOKED???
Billl
If you replaced a RESISTOR MODULE,,, You have a MANUAL SYSTEM! Was the resistor/s SMOKED???
Billl
Thread Starter
Instructor
Joined: Mar 2010
Posts: 194
Likes: 3
From: Searcy AR
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Blower motor resistor module
Just so other people who visit this post for assistance know what we are discussing here is a pic of a toasted resistor bank for a MANUAL SYSTEM.
.
.
