Anodized, brushed or polished Xtreme billet shifter knobs on GP!!!!
Thread Starter
Supporting Vendor
Joined: Jan 2000
Posts: 5,683
Likes: 14
From: TX
Cruise-In I Veteran
St. Jude Contributor '04
Anodized, brushed or polished Xtreme billet shifter ***** on GP!!!!
$60 shipped in the US. Choose from C5 emblem or 6 speed pattern in red, blue, and black anodized, brushed or high polish. These work with all aftermarket manual shifters including the A4 adaptor. Please EMAIL me for your order. Thanks guys! :cheers:
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Re: Anodized, brushed or polished Xtreme billet shifter ***** on GP!!!! (Nate@xtreme)
Just curious, has anyone held the red anodized up against the Magnetic Red II paint? Looks close, but wondering how it would match.
Also, how about heat with these ***** on an aftermarket shifter, don't they transfer the heat and get hot?
Also, how about heat with these ***** on an aftermarket shifter, don't they transfer the heat and get hot?
Melting Slicks
Joined: May 2000
Posts: 2,161
Likes: 17
Re: Anodized, brushed or polished Xtreme billet shifter ***** on GP!!!! (Nate@xtreme)
Guys - I can vouch for the awesome feel of this shofter **** - it puts the "feel" of the gears in your hand and is very solid (helping the shifts)........
Instructor
Joined: May 2002
Posts: 206
Likes: 0
From: Elmhurst IL
Re: Anodized, brushed or polished Xtreme billet shifter ***** on GP!!!! (Nate@xtreme)
I've got two of the eXtreme *****. First I got the red since I have a MagRed car. It didn't quite match, so I got the satin finish aluminum. Both feel and look great, but get damn hot during Chicago summer.
Service from eXtreme was excellent, by the way.
Service from eXtreme was excellent, by the way.
Thread Starter
Supporting Vendor
Joined: Jan 2000
Posts: 5,683
Likes: 14
From: TX
Cruise-In I Veteran
St. Jude Contributor '04
Re: Anodized, brushed or polished Xtreme billet shifter ***** on GP!!!! (Hirohawa)
our ***** do get hot in hot climates! my car does not ever sit outside in the heat, so its not an issue for me...
yes, i have some pics of the **** installed. will try and post some tomorrow.
yes, delrin ***** are almost done. they will have a small c5 logo or 6 spd pattern on top. i did not think it could be done since there is so little room, but they came out nice. pics soon...
aslo, we are having the same **** as the billets made in delrin. they will be cool in the summer, and nice in the winter. i had them made because i like the feel of our *****. thanks,
Nate
yes, i have some pics of the **** installed. will try and post some tomorrow.
yes, delrin ***** are almost done. they will have a small c5 logo or 6 spd pattern on top. i did not think it could be done since there is so little room, but they came out nice. pics soon...
aslo, we are having the same **** as the billets made in delrin. they will be cool in the summer, and nice in the winter. i had them made because i like the feel of our *****. thanks,
Nate
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
