pushrods
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
With stock heads, from what I have read, the 11/32" Mantons will fit. I used the 3/8 double taper in my AFR heads because I was told straight 3/8 wouldn't fit. I did do a test fit first though. I have a write-up on it that I posted several years ago. If you are unsure, I believe Trend will sell you two pushrods to test rather than purchasing an entire set. Speak to their tech department.
Last edited by vettenuts; Nov 7, 2016 at 06:51 AM.
Acct Suspended APR 2026 by request
Joined: Dec 2010
Posts: 10,367
Likes: 1,271
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
I was told 3/8 wouldn't fit unless you open the holes a bit in the heads so I ended up going with the 11/32 manton's... they are very nice pushrods and a good company to deal with
... here's the manton compared to your standard 5/16 chromoly pushrod
... here's the manton compared to your standard 5/16 chromoly pushrod
