New suspension coming up!
Thread Starter
Instructor
Joined: May 2015
Posts: 101
Likes: 15
New suspension coming up!
This Sunday and Monday I am going to refurbish my entire suspension.
I have all new Moog balljoints and front inner and outer tie rods. Rear gm inner and outer tierods as well as all the control arm bushings in poly. I also have all new hardware for the bushings, got the zip corvette kit.
To finish it off I will be installing Viking coilovers as well.
I have all new Moog balljoints and front inner and outer tie rods. Rear gm inner and outer tierods as well as all the control arm bushings in poly. I also have all new hardware for the bushings, got the zip corvette kit.
To finish it off I will be installing Viking coilovers as well.
Melting Slicks
Joined: Mar 2009
Posts: 2,300
Likes: 115
From: Odessa FL
St. Jude Donor '10-'12-'13-'14-'15-'16-'17
Subscribing for updates. I did all the same recently except for the control arm bushings. I have the poly bushings and a full set of extra control arms, curious how you remove the OEM rubber bushings from the control arms.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski