Seat control module question
Thread Starter
Instructor
Joined: Apr 2004
Posts: 245
Likes: 0
From: Springfield MO
Seat control module question
I think I already know the answer, but I want to consult the brain trust here on the forum. My driver's seat will only move forward and back and was also inflating and deflating the sides with out the switch being actuated. I think my module has gone belly up. But need a second opinion. Thanks.
Safety Car
Joined: Mar 2016
Posts: 3,534
Likes: 432
From: Atlantic Beach FL.
It sounds to me like a switch problem as they are known to fail. I cannot say for sure without more information though.
The seat module would likely throw codes. In case you haven't already seen this here is a video on how to retrieve codes from the DIC. If you have any codes please post them.
The seat module would likely throw codes. In case you haven't already seen this here is a video on how to retrieve codes from the DIC. If you have any codes please post them.
Last edited by Rob 02; Mar 23, 2018 at 02:48 AM.
Administrator
Joined: Mar 2001
Posts: 368,297
Likes: 24,776
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Moved to C5 Tech.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
The LUMBAR issues is separate from the seat movement. The lumbar pressure switch isn't seeing the correct set pressure (due to leaks) and continues to RUN. See if you can try to LOWER the bolster set pressure to zero and see if it quits running.
I would see if the Seat Multifunction SWITCH is your issue before you go module. Are the fuses good and the resettable breakers functioning. Do you have power to the module????
LUMBAR:
SEAT MOTORS:
Hope this helps....
BC
I would see if the Seat Multifunction SWITCH is your issue before you go module. Are the fuses good and the resettable breakers functioning. Do you have power to the module????
LUMBAR:
SEAT MOTORS:
Hope this helps....
BC
