#52 blown
Thread Starter
Instructor
Joined: Sep 2018
Posts: 194
Likes: 23
From: Illinois
#52 blown
I keep blowing fuse number 52 what could be the issue was getting stalled motor code 1243 then code 1217 did a brake bleed an fluid change and 1243 cleared however now fuse 52 keeps going. TIA.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Disconnect the motor connector and run the motor with some jumper cables / leads. If you have an AMP CLAMP you can read the current draw of the motor and see if its drawing excessive current.
What is the resistance of the motor windings.
What is the resistance of the motor windings.
