When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nothing in the console can affect the reverse lock out solenoid, but I did mine last year and you don't have to lower the rear carriage, it's a blind install but it's not that hard.
Just replaced mine last week, my part number for AC/Delco was 19180052. It is located up on top of transmission accessible from passenger side, use a 1/4 ratchet with a deep 13mm socket to remove the one bolt to remove it. I had to place the shifter in any forward gear and leave the ignition switch in the ON position in order to get the plunger to retract to install the new one. It's great not having to worry about shifting into 5th gear again.