No Start issue
Thread Starter
Instructor
Joined: Sep 2018
Posts: 100
Likes: 21
From: DePere, WI
No Start issue
Can someone please refresh my old memory? After running the car and doing some shopping, I go to start the car and I get the "wait 10 seconds" message. What is the fix for this?
Melting Slicks
Joined: Sep 2008
Posts: 3,117
Likes: 793
From: Espanola New Mexico
The one thing to do is make sure your battery is fully charged, have it load tested at your local auto parts store, as low voltage can and will cause the wait 10 seconds message. Also does your car have a LMC column lock bypass module installed, if not I would recommend installing one, hope this helps.
Better sooner than later!
Melting Slicks
Joined: Aug 2013
Posts: 2,491
Likes: 315
St. Jude Donor '15-'16-'17-'18-'19-'20-'21-'22
Thread Starter
Instructor
Joined: Sep 2018
Posts: 100
Likes: 21
From: DePere, WI
Thanks for the reply. The car does have the module installed. I checked the battery voltage and it is only 12.2. So, that being said
, even though the battery is 2 months old, it is on the charger and will get it load tested
, even though the battery is 2 months old, it is on the charger and will get it load tested
