hardened input shaft, inst. hint ?
Safety Car
Joined: Feb 2000
Posts: 3,683
Likes: 0
From: Austria
Re: hardened input shaft, inst. hint ? (c5norway)
anyone have a good site that explains step by step
how i do this ?
how i do this ?
Haven´t seen you posting for a while.
Is all doing well?
BTW, want to know the same.
My input shaft is laying in the garage, waiting to be installed.
Michael
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
Re: hardened input shaft, inst. hint ? (Austrian Vette)
Are you talking about the Long output shaft in the tranny? If so I have installed a few of them. Let me know....
Phillip :cheers:
Phillip :cheers:
Guest
Posts: n/a
Re: hardened input shaft, inst. hint ? (Phil97SVT)
Hi Michael, yes long time no "see"
I am about to put in my FLP levelIV and Vigilante 5 disc, and a new 427 cui LPE engine.
I hope my 427 like my spinning exhaust :-)
Phil, i ment the output shaft in the rear end, the one that often break when applied to too much TQ
any hint or WEB page that describe what to do ?
I am about to put in my FLP levelIV and Vigilante 5 disc, and a new 427 cui LPE engine.
I hope my 427 like my spinning exhaust :-)
Phil, i ment the output shaft in the rear end, the one that often break when applied to too much TQ
any hint or WEB page that describe what to do ?
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
Re: hardened input shaft, inst. hint ? (c5norway)
How to install a hardened output shaft:
Remove Rear carrier
remove 12 bolts to remove cover
remove 2 allen bolts holding stud plate
remove center diff assembly
Unbolt 8 surrounding bolts on diff
seperate diff housing
remove C-clip
remove gear
remove clutches
install new shaft....its that easy in fact its VERY easy.
Phillip
Remove Rear carrier
remove 12 bolts to remove cover
remove 2 allen bolts holding stud plate
remove center diff assembly
Unbolt 8 surrounding bolts on diff
seperate diff housing
remove C-clip
remove gear
remove clutches
install new shaft....its that easy in fact its VERY easy.
Phillip
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Feb 2000
Posts: 3,683
Likes: 0
From: Austria
Re: hardened input shaft, inst. hint ? (c5norway)
Thanks Phil,
God i love CF and internet :-)
what about you Michael, ready to install, i will start next hour or so
God i love CF and internet :-)
what about you Michael, ready to install, i will start next hour or so
I will go skiing with my kids tomorrow and come back Friday next week.
So......no install, yet. :lol:
Michael
[Modified by Austrian Vette, 7:13 PM 1/31/2003]
Drifting
Joined: Jan 2001
Posts: 1,511
Likes: 1
From: paradise valley az. us
Re: hardened input shaft, inst. hint ? (Austrian Vette)
Always a mod I wanted to do.Now that I am going to buy wheels slicks and skinnies it seems it would be a good compliment to the twin turbo C5R LPE car.I have them in the shop its just that I'm real impressed with the stock drivetrain and I put down GOBS of TQE at the wheels and I'm not scared to use my boost controller and the 104 race gas.
If I replace it I will never know what it takes to bust it which is actually very valuble to the whole community.Of course if I just bolt on the slicks it will be flatbedded home.Good Luck on the install there not that tough.Dave S.
If I replace it I will never know what it takes to bust it which is actually very valuble to the whole community.Of course if I just bolt on the slicks it will be flatbedded home.Good Luck on the install there not that tough.Dave S.
